Home » Service Areas » Selma
When you call about an electrical problem in Selma, the visit starts the same way every time. We look at what you have, trace the issue to its source, and tell you what we found before any work begins. You get the scope and the price on the call, so nothing is decided without you knowing what it involves. We cover Selma and the surrounding area every day from 7:00 AM to 10:00 PM, and we take last-minute calls when the situation calls for it.
The homes and businesses in this town range from newer construction to properties that have been standing long enough to carry wiring that was never designed for today's loads. Rental properties, small businesses, homeowners adding circuits for a new appliance or an EV charger, properties coming up for sale that need a clear picture of the electrical system: these are the calls we get from Selma, and they are all work we handle.
Electrical problems don't wait, and neither do we, which is why a load question gets answered before any new circuit is run or any appliance is connected. When a property is asked to run something it was not originally wired for, the first step is finding out whether the existing supply can carry it. That means looking at what the panel is rated for, what is already drawing from it, and what headroom is left.
A panel that made sense for a home twenty years ago may not have the capacity for a Level 2 EV charger, a new range, and a central air unit all competing for the same service. We run a load calculation before recommending a path forward. Sometimes a dedicated circuit is enough. Other times the panel itself needs to be upgraded before anything new can be added safely.
We handle 100-amp to 200-amp upgrades, main panel replacements, and service entrance work. If the calculation shows the current service can carry the new load, we say so and run the circuit. If it cannot, we explain what an upgrade involves and price it before anything is scheduled. The scope of the electrical work is priced before it starts.
For a detached garage, a workshop, or an outbuilding that needs its own circuits, running every individual circuit back to the main panel is rarely the right answer. A subpanel installed at the outbuilding gives it its own breaker capacity, fed by a single run from the main panel. We size the subpanel to what the space actually needs, not just what it needs today.
Appointments are arranged on the call. We scope the job, confirm the price, and set a date that works for your schedule. If something comes up that will not keep, it is worth calling to ask what the current schedule allows. We take short-notice calls when the work is urgent and the schedule has room.
For rental properties, we work around tenants. For businesses, we understand that a circuit going down during operating hours is not the same as one going down on a weekend. We talk through timing on the call so the visit lands when it causes the least disruption. Prompt response, even for last-minute electrical calls, is part of how we work.
Some electrical problems are straightforward to find. Others only appear under specific conditions, and chasing them is its own job before any repair can begin.
A breaker that trips once and holds after a reset is different from one that fails only when the circuit is under full load. A flickering light that comes and goes with the weather may point to a loose connection that tightens and loosens as the building moves. An outlet that works fine until a particular appliance is plugged in is telling you something about the circuit, not just the outlet.
These intermittent faults require a methodical approach. We work through the circuit from the device back to the panel, checking connections, testing under load, and looking for the condition that triggers the failure. A breaker that keeps tripping is a warning worth heeding, and finding the cause is always more useful than resetting and waiting.
We service this area, and its neighborhoods each have their own wiring. The jobs below cover most of what comes up in Selma, and each one starts the same way: we find out what is there before deciding what it needs.
A full rewire replaces the branch-circuit wiring throughout the house and is the right answer when the existing wiring is knob-and-tube, deteriorated aluminum, or simply too old to carry a modern load safely. Knob-and-tube wiring has no ground conductor and was sized for a fraction of today's demand. Aluminum branch-circuit wiring expands and contracts in ways that loosen connections at outlets and switches over time, creating a heat risk at those points.
A partial rewire addresses a specific section of the home or a set of circuits rather than the whole building. It is often the right call when a remodel is opening walls anyway, or when one part of the house has wiring that is clearly worse than the rest.
A subpanel gives a detached space its own breaker capacity without running individual circuits all the way back to the main panel. We size it for the actual loads the space will carry, pull the run from the main panel, and install the subpanel with the breakers the space needs. This is the right approach for a garage with power tools, a workshop with dedicated equipment circuits, or any outbuilding that needs more than a single outlet.
Older properties often have grounding and bonding that was acceptable under the code in place when they were built and does not meet current standards. Missing grounds, improper bonding at the panel, and ungrounded outlets are all common findings during an inspection. We identify what is there, explain what it means, and correct it as part of a broader service visit or as a standalone job.
A surge protective device at the main panel covers every circuit in the building, which is a different level of protection from a plug-in strip on a single outlet. A voltage spike from a nearby lightning strike, or a surge pushed through the utility line during a grid event, can reach appliances, electronics, and the panel itself across every circuit at once. Panel-level surge protection is a single installation that addresses the whole building, and it pairs naturally with a panel upgrade or a generator hookup when the work is already underway.
Ground-fault circuit interrupter protection is required by code in kitchens, bathrooms, garages, and exterior locations because those are the places where a fault is most likely to involve water or contact with a person. Arc-fault circuit interrupter protection addresses a different risk: the kind of arcing that happens inside a wall when wiring is damaged or a connection has loosened, which can start a fire without tripping a standard breaker. We install both as replacements for existing devices, as part of a panel upgrade, and as part of a broader wiring correction.
Electrical pricing depends on what the job actually involves, and that is not something that can be answered with a flat figure. What moves a quote is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being asked of it.
When you call, we ask about the symptom, the property, and anything you already know about the panel or the wiring. From that conversation, we give you a price before a date is set. You decide whether to move forward with the full picture in front of you.
If the work turns out to involve something that was not visible or knowable from the initial description, we stop, explain what changed, and get your approval before going further. You are not billed for additional work without knowing about it first. Call and we'll get the current flowing right. The process is written out on our page of electrical services.
Selma sits in the middle of a stretch of Bexar County that includes Universal City, Live Oak, Garden Ridge, Schertz, and Converse, and we cover all of it. Residential and commercial calls across this part of the county are handled the same way: scope on the call, price confirmed before the visit, work completed and tested before we leave.
If you are in one of the neighboring communities and are not sure whether we cover your address, call and we will confirm it. Coverage across this part of Bexar County is not a question we have to think about.
Changes after rough-in are possible but add work. Moving a circuit or adding an outlet after the wiring is in the walls means reopening the path and re-running the cable. It is far easier to make those decisions before the rough-in. We ask the right questions during scoping to reduce the chance of changes mid-job.
Low-voltage landscape lighting runs off a transformer plugged into a standard outdoor outlet. Line-voltage landscape lighting, including hardwired path lights and security fixtures, requires a circuit run from the panel with wiring rated for outdoor and underground use. We handle the line-voltage side of the installation and the circuit it runs from.
We need clear access to the panel to do any panel-related work safely. If the panel is blocked by stored items, clearing a path before the visit keeps the job on schedule. If the panel is in a locked common area or utility room, we coordinate access through whoever controls that space before we arrive.
In most cases, yes, though there will be periods during the work when power to parts of the home is off. We sequence the work to minimize the time any given area is without power, and we let you know in advance which circuits will be down and when. For a full rewire, expect a multi-day job with some disruption to normal use of the space.
We are available every day from 7:00 AM to 10:00 PM. If a commercial job needs to be scheduled outside normal business hours to avoid disrupting operations, we discuss what the schedule allows when you call. Not every request can be accommodated, but it is worth asking.
A pre-purchase inspection gives a buyer a clear picture of the electrical system before closing, including the panel, the branch circuits, the grounding, and any visible wiring that raises a concern. A pre-sale inspection lets a seller know what an inspector is likely to find. We document what we find, explain what it means, and give you a straightforward account of what the property's electrical system looks like.
We need reasonable access to bring tools and materials to the work area. For most residential jobs that is straightforward. For commercial properties or jobs in dense areas, it helps to have a plan for access before the visit. Let us know on the call if access is likely to be a constraint.
Yes. Office wiring, panel upgrades for commercial properties, dedicated circuits for commercial kitchen equipment, and lighting installations for retail and business spaces are all work we take on. Call to describe the property and the job, and we will scope it from there.
If you are seeing a warm outlet, a burning smell, scorch marks near a receptacle, or a breaker that will not hold after being reset, those are conditions that should not wait. Flickering lights and dead outlets are worth calling about too, because the cause is not always minor. When in doubt, describe what you are seeing on the call and we will help you decide how quickly it needs attention.
When you call (830) 368-3665, we ask what you are dealing with, what the property looks like, and what you need.
By the end of that call, you know what the job involves, what it will cost, and when we can get there. We are available every day from 7:00 AM to 10:00 PM. Arrives fast. Wires it right. A figure before anything starts.
Also serving the towns around: Live Oak, Kirby, Alamo Heights. View our full list of towns.
Below is a breakdown of the electrical work we handle for homes and businesses in Selma and the surrounding Bexar County area. Each service is scoped on the call before anything is scheduled, so you know what the job involves and what it costs before we set a date. Whether the need is a quick repair or a full panel upgrade, the process starts the same way: a call, a clear price, and work done right.
| Service | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Wiring for Additions & Remodels | Electrical rough-in from framing through finish, New circuits for expanded living space, Panel capacity check for added load, Coordination with other trades on the schedule | Home additions, garage conversions, and kitchen or bathroom remodels | Remodel wiring is permitted and inspected. We confirm what the project requires during the scoping call. |
| Electrical Safety Inspections | Pre-purchase and pre-sale walkthroughs, Rental property circuit and panel checks, Documentation of findings, Older-home wiring assessments | Buyers, sellers, landlords, and property managers needing a clear picture of the electrical system | An inspection documents what is present and what needs attention, giving you a basis for decisions before a transaction or tenancy. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Load calculation before any work starts, Service entrance replacement, Subpanel installation for garages and additions | Homes adding major appliances, EV chargers, or AC capacity | Panel upgrades require a permit and inspection. Permit filing and inspection coordination are handled as part of the job. |
Call (830) 368-3665 to talk through what you need. We scope the job on the call, give you a price before anything is scheduled, and get to work when you are ready.